Features include:

• Precision “Turcite-B” ways; saddle movement
• Hydraulic table & electronic crossfeed
• Auto incremental downfeed
• Auto lubricator, rapid elevation
• Maximum grinding capacity: 16” x 40”

Acra’s Milling Machine features:

• Machine base, knee, and table with Meehanite cast iron construction.
• Heavy-duty milling head assembly.
• Milling head can be rotated at 90 degrees by right & left side.
• The X axis is dovetail way, Y, Z axis are square way.
• Slide ways are hardened and precision ground within HRC48 to HRC52.
• Chromed & Hardened X/Y/Z axis
• Lead Screw with double nuts.
• X/Y axes surface coated with Turcite-B.
  

Smart NC-100 (SNC-100) technology provides most of the benefits of NC controlled saws at a mere fraction of the cost. SNC-100 controls are programmable up to 100 different jobs including quantity and length of cut. The controls automatically compensate for Kerf loss after data input and requires no manual calculation of number of times to index.

The Morrison Keyseater is built to ensure an accurate keyseat. Inaccurate keyseats cause needless expense and delays in fitting. The Morrison is designed as a machine tool with long fully scraped bearings between table and base. The work is fed into the cutting tool and the single cutter takes the cut the full length of the work before backing out and relieving itself. This means that this is not a sawing operation but a cutting stroke that ensures a clean, straight keyseat.

Features include:

• Max Turning Diameter: 15.7″
• Max Turning Length: 50.4″
• Max Bar Capacity: 4.05″
• Swing Over Bed: 22.4″
• Distance Between Centers: 52.8″
• X Axis Travel: 11.1″; Z Axis Travel: 52.4″
• Rapid Traverse X Axis: 787 IPM; Rapid Traverse Z Axis: 945 IPM
• Spindle Nose: A2-11
• Spindle Bore: 4.5″
• Spindle Speed: 0 – 2800 RPM
• Turret Capacity: 12 Stations
• Turret Index Time: 0.15 Second
• Tailstock Taper: MT-4
• Tailstock  Quill Dia.: 3.97″
• Tailstock Quill Travel: 4.7″

Features include:

• Max Swing: 27.5″
• Swing Over Carriage: 18.9″
• Max Turning Diameter: 21.7″
• Max Turning Length: 41.1″
• X / Z Axis Travel: 14.3″ / 43.5″
• Rapid Traverse: 630/790 IPM
• Bar Capacity: 4.6″
• Spindle Nose: A2-11
• Spindle Motor: 50 HP
• Spindle Torque: 1836 Ft-lbs
• Spindle Speed: 20-2,000 RPM
• Power: 200/220V/3ph

The Hercules-Ajax Heavy Duty 25" Manual Lathe is a reliable and durable machine designed for heavy-duty machining applications. With a large 25" swing and a long bed, it is capable of handling a wide range of workpieces. The lathe is equipped with a powerful motor and a high-precision spindle, ensuring accurate and consistent results. It also features a heavy-duty construction and a durable design, making it capable of handling even the toughest machining tasks.

High-grade Meehanite casting for column and bed designed with box structure to reduce vibration. Also with Box way, the model has high rigidity and stability, which provides excellent machining efficiency for tough materials, especially for the Aerospace industry.

Features include:

• 28.7” X 25.6” X 28.7” horizontal machining center with super GI.3 control for faster processing
• Full 4th axis NC rotary table
• 60 tool ATC
• Renishaw probe
• S retention stud
• Pallet changer w/ safety cover
• Door interlock
• 300 PSI thru spindle coolant
• Coolant system w/ 26 nozzles
• Lift-up chip conveyor
• Splash guard
• Helical interpolation

KMC-323RF features:

• 127.2" x 116.1" x 43.3" axis travels
• High quality, rugged Meehanite cast iron castings
• Y-Axis step design
• Hardened and ground box ways provide high load-bearing capacity
• Precision hand-scraped joint
• Integral ballscrew mounting brackets, pre-tensioned ball screws in all axes
• X-Axis inner cooled ballscrew
• 60 tool automatic tool changer
• ATC auto door
• Automatic attachment changer
• Dual auger chip evacuation system w/ hinge type chip conveyor

The PS-Series machines will change the standard for vertical machining centers in the production machining arena. By design, the PS65 and PS95 machines offer a unique blend of power, speed, precision, efficiency, flexibility and productivity. The basic machine design incorporates a heavy cast iron construction for stiffness, rigidity and precision, and includes core-cooled ballscrews and temperature control for precision and linear guideways for speed and performance.

The a81nx builds on the industry-leading performance of its predecessor with new design elements that tackle the large part challenges common in many industries. It expands part size capacities through enhanced table and column castings that produce 12.5% more work envelope. Robust 3-roller style B-axis table bearings ensure stable cutting throughout this new-found work zone. This machine opens up new opportunity for larger parts with dynamic precision.

The PUMA Series is DN Solutions (formerly Doosan Machine Tools) high performance lathe series. Designed for heavy and intermittent cutting, accurate production, and premium surface finishes, this series has a wide variety of models with chuck sizes ranging from 8”-21”, turning lengths up to 120", and options for sub-spindles, y-axis, and milling capabilities. This Series has a box guideway structure which prevents vibration and gives it secure dynamic rigidity. It has the highest spindle speed in its class and also delivers powerful cutting capabilities.

The G38P-150NC is equipped with a powerful motor and a high-precision spindle, ensuring accurate and consistent results. It also features a durable construction and a compact design, making it a great choice for a variety of applications. The machine is equipped with a hydraulic chuck and a programmable control system, allowing for easy and precise operation.

Features include:

• One piece heavy duty cast iron bed construction for high accuracy & rigidity
• 4,000 Rpm high power main spindle
• Heavy duty cutting with excellent performance
• 12 station rigid turret
• 24 X 30 M/Min rapid traverse
• Hardened & ground solid box guide ways

Features include:

• One-piece heavy-duty cast iron base with a special exit for chips removal
• Oversized rigid compound rest for heavy cutting
• Hardened and precision ground gears and bedways
• Hardened and ground spindle nose
• Full Meehanite casting bed

ZOLLER »smile« is a must for manufacturing companies carrying out machining work: easy to operate, exclusively constructed with high-quality brand name components, comes equipped with all standard measuring functions for professionally presetting and measuring cutting tools, and suitable for difficult shop floor use thanks to its well thought-out construction.

The variable control unit, the ergonomic single-hand operating handle »eQ« and the freely accessible tool clamp make work more comfortable.